The evaporator coil is where the cooling actually happens. Air from the return passes through thin aluminium fins packed closely together, and heat is drawn out of it before it heads into the ducts. Those fins are close enough to catch dust that slips past a tired filter, and once a layer forms across the face, air has to squeeze through a partly blocked surface. Cooling suffers, the coil can run colder than it should, and the unit spends more time running to reach the set temperature.
In many ducted systems the coil face can be reached from the return air side once the filter and grille are out. Where that is the case, we carefully vacuum and brush the surface dust from the fins, using soft tools and working in the direction of the fins so they are not bent. If the coil is dirty enough to need a deeper clean with coil cleaner and rinsing, or is only reachable by opening the unit, we will tell you and suggest involving a technician.
This service is about airflow, not refrigeration. We do not touch gas, electrical components or the outdoor unit. What we can do is clear the dust that commonly chokes the coil face, so the cleaner ducts downstream receive a stronger flow of cooled air. Keeping the return filter clean after our visit is the simplest way to stop the coil face clogging again, and we will show you how to check it between cleans.